Description

9mm I.D Brake Fluid Resistant Rubber Hose

This high quality, German made 9mm I.D Brake Fluid Resistant Rubber Hose is suitable for transferring low pressure brake and clutch fluids that are based on Polyglycol, such as DOT 3, 4, 5 and 5.1. Does not allow the fluid to sweat through the hose like most cheaper alternatives.

Description

• 9mm inside diameter which ensures a good fit with 10mm or 3/8″ pipes and fittings. This has an O.D of 15mm.
• Resistant against and can be used with all synthetic brake fluids based on Polyglycol including DOT 3/4/5/5.1 etc
• Made of multiple, high performance layers; an EPDM Rubber inner, an Braided Aramid Fibre reinforcement and an EPDM Rubber outer.
• Has a working pressure of -0.9 BAR to 15 BAR and a burst pressure of 60 BAR.
• This hose has a wide working temperature range from -40°C up to +130°C
• Very low water permeation
• Does not contaminate the brake fluid inside the hose
• Made in Germany by Cohline

Uses

Suitable for the transfer of low pressure brake and clutch fluids such as a ‘connecting feed hose’ from the reservoir to the master cylinder.

Order Code: 2337-0915

Also available with a 7mm I.D, please see our other sizes of rubber hose and tubes by clicking here.